Digital Projector Locations

6
Jan/10
0

Digital Projector Locations


New CABLES TO GO 1ft HD15 M/M SXGA Cable W/45 Connector Allows Installation In The Tightest Location


New CABLES TO GO 1ft HD15 M/M SXGA Cable W/45 Connector Allows Installation In The Tightest Location


$21.09


Notice: $50 charge per refused shipment unless the refusal is based on our error. Customers should thoroughly inspect all cartons for damage before signing for the shipment. Damage: Must be reported within 15 days from delivery date. Shortage/Fallout: Must be reported within 15 days from delivery date. Loss: Must be reported within 30 days from ship-date. If you have any other questions about…

Question on digital projector problem?

I have a new projector (PJ513DB Viewsonic) that I just got for use in an outdoor amphitheater. The projected screen is much smaller than expected. Because of setup constraints I cannot move the projector from its current location. Is there any additional equipment to expand the size of the projected screen?

Unfortunatly, probably not…

I do not believe I’ve seen anything marketed to do this for consumer/office projectors, and an internet search provided no good results.

You may be able to use a wide angle adapter for consumer camcorders, but the quality will be reduced by doing so.

The lens looks large so it may be a challenge to find a wide angle adapter suitable.

Another option is to get two mirrors (one can be relativly small (1′6″ square or so) and the other should be larger (4′ square or so). Mount one mirror to reflect the image up into the air. Mount the other mirror to reflect that image back towards the screen. The added distance will help make the image larger. You can play around with the distance from the projector to the mirror and the distance between the mirrors to get different size images. You may have to switch the projector into ceiling mode if the image is flipped when this is done.

Good luck, hope you can figure it out!

Comments (0) Trackbacks (0)

No comments yet.

Leave a comment

No trackbacks yet.